N14 Springs and Shocks Replacement
Previous Page
Step Nine - Reinstall the shock assembly in the vehicle using the reverse procedure, attaching the three nuts on top of the suspension turret first and then the two bolts that attach the hub to the shock.
Step 10 - Reattach the brake fluid line and that's it - all done! One down, three to go!!!
Click Here for Before and After Pics
Other Pics:
1. To change the rears you'll need to remove the factory rear speaker panel.
2. A view of the top of the rear suspension turret.
3. The difference in height of the standard spring and the 1.5" progressive rate lowered King Spring.
4. Another pic, just because I can.
5. A pic of my KYB rear shock. They come with instruction an a replacement washer and nut for the centre rod.
6. The bump stop inside the spring (assembly inverted).
Next Page
